-40%
BatteryMINDer 12 Volt 2 Amp Battery Charger [2012]
$ 45.07
- Description
- Size Guide
Description
Important Note:This charger is specific to Wet batteries. It will not work with AGM batteries.
Product Specifications for BatteryMINDer 12 Volt 2 Amp Battery Charger with FREE Digital Voltmeter
BM Part #:
2012
Voltage:
12 Volt
Capacity:
2 Amp
Shipping Weight:
2.20Lbs
Warranty:
5 Year Factory Direct
What's in the box:
(1) BatteryMINDer® Model 2012
(1) RT-2415 Ring Terminal Assembly with Quick Connector
(1) BC-2410 Battery Clip Cord Set with Quick Connector
(1) ATS-1 Ambient Temperature Sensor
(1) 6' AC power cord, 6' DC cord with quick connector (SAE)
(1)
FREE
Digital Voltmeter
(.95 Retail Value!)
Features:
Installed ambient temperature sensor for 0°F-130°F operating range ensures the battery will never be overcharged or undercharged regardless of temperature extremes. Optional "at the battery" sensor is also available for greater accuracy when battery and charger are not in same ambient temperature environment.
Diagnostic LED indicators for power, polarity reversal, battery weak, load, bad cell, testing, desulfating, temperature compensation, charging stage and charge level.
Maximizes battery life and capacity, reconditions weak batteries.
Automatic high frequency (not high voltage) pulse desulfation (U.S. patented.)
Plug 'n Run operation-no buttons to push.
Weatherproof / water and intrusion resistant to International Standard IP65. FCC certified.
Microprocessor controlled ensures accurate-precise charging and maintenance during entire lifetime of unit.
Maintains up to six batteries at a time (six 12 Volt batteries connected in parallel). Requires use of Y-Connectors 210AY (sold separately) or customer supplied 18-Gauge insulated wire.
Extremely efficient, low operating costs.
Automatic disconnect and resume if AC power is interrupted.
Short circuit, spark, polarity and thermal runaway protection.
Built-in Battery Condition Indicator.
Worldwide 100-240 VAC 50/60 Hz input.
For All Sizes and Brands of Standard 12 Volt Lead-Acid Batteries including but not limited to flooded: filler cap, maintenance-free, valve regulated lea-acid VRLA), sealed lead-acid (SLA), starter, deep cycle and hybrid.
Product Description
Important Note:
For Optima, Odyssey, Polaris, Yuasa & other High Performance Specialty 12 Volt Sealed AGM Lead-Acid Batteries,
please see this charger
.
Using an array of microprocessor controlled sensors, BatteryMINDer Model 2012 actively monitors your battery's voltage, amperage acceptance, and temperature at all times. Working through a series of charging and diagnostics stages, the internal program adjusts its output several times a second based on sensor reading to quickly and correctly charge your battery. When used as a maintainer, the BatteryMINDer is guaranteed to maximize your battery's life and storage capacity. The temperature compensated long-term float (maintenance) stage can add years of service, and patented full-time pulse desulfation is designed to reverse and eliminate battery sulfation, the #1 cause of early battery failure.
Features:
Guaranteed to never overcharge.
Temperature compensation ensures proper charge in hot or cold environments.
Power, polarity reversal, battery weak, load, bad cell, testing, desulfating, temperature compensation, charging stage and charge level indicators.
Maximize battery life and capacity, recondition weak batteries.
Pulse desulfation.
Plug and run operation.
Water resistant (IP65).
Microprocessor controlled.
Maintain up to 6 batteries at a time.
Extremely efficient, low operating costs.
Automatic disconnect and resume if AC power is interrupted.
Short circuit, spark, polarity and thermal runaway protection.
6' AC cord, 6' DC cord with quick connector (SAE).
1 year 100% money back guarantee, 5 year manufacturers warranty.
Included Accessories:
2' Battery Clip Cord Set with Quick Connector
2' Fused Ring Terminal Cord Set with Quick Connector
ATS-1 Ambient Temperature Sensor
(BUILT INTO CHARGER)