Simpson SFI 16.1 3"X3" Off Road NASCAR Harness 5-Point Snap Hook Black 1B33_11-S

Description

Simpson SFI 16.1 3"X3" Off Road NASCAR Harness 5-Point Snap Hook Black 1B33_11-S
This product data sheet is originally written in English.
Simpson SFI 16.1 3" X3" NASCAR Latch Off Road Harness Restraint - 5 Point Black (1B33_11-S)
Key Features
- SFI 16.1 Approved
- 3" Latch and link system
- 5-point design for safety
- Black hardware
- Snap hook ends
WARNING
- The effectiveness of this harness is directly related to the way in which it is installed, used and maintained. The user assumes that risk. No warranty, expressed or implied, is made as to its' ability to protect against serious injury or death. See instructions for correct installation which should only be done by a qualified professional. If in doubt, consult the Manufacturer. Harnesses should be returned to the Manufacturer for inspection once a year and replaced at least every two years. Harnesses should be replaced following an accident, or when the webbing or hardware is damaged in any way or does not function properly. There is a release mechanism lever which is integrated into the ratchet to enable the ratchet to be over ridden and released. This must be secured in the correct location to ensure the ratchet mechanism is able to be work effectively. It is the responsibility of the wearer to ensure the harness is secured and not damaged or altered in any way. Harnesses should be inspected before use and should be replaced regularly. Harnesses should be replaced after any collision or in any event that may affect the integrity of the harness.
To complement these belts, we have a range of SFI & FIA Approved products available in our online store. Please contact us if there is something you cannot find.
WARNING - The effectiveness of this harness is directly related to the way in which it is installed, used and maintained. The user assumes that risk. No warranty, expressed or implied, is made as to its' ability to protect against serious injury or death. See instructions for correct installation which should only be done by a qualified professional. If in doubt, consult the Manufacturer. Harnesses should be returned to the Manufacturer for inspection once a year and replaced at least every two years. Harnesses should be replaced following an accident, or when the webbing or hardware is damaged in any way or does not function properly. There is a release mechanism lever which is integrated into the ratchet to enable the ratchet to be over ridden and released. This must be secured in the co
Modified Item
No
Classic Car Part
Yes
Colour
Black
EAN
Does not apply
Manufacturer Part Number
1B33_11-S
Custom Bundle
No
Brand
Simpson