STA-BIL Starting Fluid - Prolongs Starter Life for Gasoline & Diesel Engines

Description

STA-BIL Starting Fluid - Prolongs Starter Life for Gasoline & Diesel Engines
Faster starts, even in temperatures as low as -65°F
Formula contains upper cylinder lubricant as well as corrosion inhibitors
For gasoline, and diesel engines - Including: cars, trucks, motorcycles, tractors, buses, marine engines, lawnmowers, snowmobiles, snow blowers, construction equipment, etc.
Will not harm catalytic convertors or oxygen sensors
Made in the U. S. A.
Looking for a quick start? Well, you are in the right place! STA-BIL Starting Fluid uses a premium ether content vs the competition to deliver faster starts. Our first-class formula provides an upper cylinder lube and corrosion inhibitor allowing it to be safely used in diesel-powered vehicles as well. This heavy-duty formula is effective in all 2 and 4 cycle engines for quick easy starts to get your engine up and running. If you are in a cold climate this highly effective formula works down to -65°F. Great to keep a can around the shop for the next time you may need it. STA-BIL is proudly made in the USA. For automotive use, remove the air filter and spray inside the carburetor or intake tube for 2-3 seconds. Attempt to start and repeat as necessary. If the vehicle does not start after a few tries there is most likely an underlying issue. For small engine use, remove air filter cover and filter and spray directly in the carburetor for 2-3 seconds. Attempt to start. After a few tries if the motor does not start there may be another issue.